- Laser cut material sample
- Raster engraved stroke & fonts
- Laser cut test widths
Your supply only. We don’t hold stock of any fabric. The fabrics gallery is to give an indication of how the laser reacts to different textiles. We recommend having your fabric sent straight to us from your supplier once a quotation is confirmed.
|Fabric size:||Any size up to 2400×1200mm|
Download fabric drawing templates
Cotton is a natural fiber harvested and woven from the cotton plant.
With all natural fabrics, the edges mark slightly when cut. Usually a very light browny yellow tone. We cut fabrics on the engraving table or clean Honeycomb bed which can also mark the underside of the fabric.
The laser seals the edge to prevent fraying.
Cut widths & Kerf
As a benchmark, we recommend that minimum cut widths be no thinner than 2mm. Since cottom has quite an open weave anything thinner might fall apart completely. See more on cut widths and Kerf (how much the laser takes away.)
Most cottons tend to engrave with a yellow tinge. The lighter the fabric tone the stronger the engraving contrast.
Supplying fabrics flat as possible
You need to make sure you supply your cotton as flat as possible. Try and make sure it is not crumpled, this can have issues on the focus of the laser.