We make your ideas
  • Laser engraving and cutting denim_cutlasercut.jpg, Laser engraving and cutting denim

    Laser cut material sample

  • Laser engraved_denim_cutlasercut.jpg, Laser engraved denim fabric

    Raster engraved stroke & fonts

  • laser cut denim tolerance tests_cutlasercut.jpg, laser cut denim tolerance tests_cutlasercut

    Raster & vector engraved power tests

  • Laser cut material sample Laser cut material sample
  • Raster engraved stroke & fonts Raster engraved stroke & fonts
  • Raster & vector engraved power tests Raster & vector engraved power tests


Your supply only. We don’t hold stock of any denim material. The fabrics gallery is to give an indication of how the laser reacts to different textiles. We recommend having your fabric sent straight to us from your supplier once a quotation is confirmed.

Thickness: Any thickness
Felt size: Any size up to 2400×1200mm

See drawing guidelines for more on setting up a file using the drawing templates.»

See more on our laser cutting and engraving service for fashion and textile designers»

Material properties

Denim is a rugged cotton twill textile. As you probably know already, denim is traditionally coloured blue with indigo dye.

Laser cutting

Denim laser cuts cleanly. Marks on the top surface are not usually noticeable. We cut denim on the engraving table or clean honeycomb bed which can also mark the material underside very slightly.

Cut edge

The laser seals the edge to prevent fraying with a light brown appearance.

Cut widths & Kerf

As a benchmark, we recommend that minimum cut widths be no thinner than 2mm.

Laser engraving

The engraving will be lighter in contrast to the denim colour ranging in shades of light brown to white (depending on the type.)

Supplying fabrics as flat as possible

You need to make sure you supply your denim as flat as possible. Try and make sure it is not crumpled, this can cause issues when cutting.